EXHAUST SYSTEM INSPECTION/
COOLANT LEVEL INSPECTION
3-28
EXHAUST SYSTEM INSPECTION
1. Inspect:
S Exhaust pipes
S Mufflers
Cracks /Damage ! Replace.
S Gaskets
Exhaust gas leaks ! Replace.
2. Check:
S Exhaust pipe nut 1
S Exhaust pipe bolt 2
S Muffler bolt 3
S Bolt (exhaust pipe and muffler) 4
COOLANT LEVEL INSPECTION
NOTE:
Position the motorcycle straight up when inspect-
ing the coolant level.
1. Place the motorcycle on a level surface.
NOTE:
Place the motorcycle on its centerstand if a cen-
terstand is equipped. If not, place a suitable stand
under the motorcycle.
2. Inspect:
S Coolant level
Coolant level should be between maximum a
and minimum b marks.
Coolant level low ! Add soft water (tap water)
to proper level.
INSP
ADJ
20 Nm (2.0 mSkg)
24 Nm (2.4 mSkg)
24 Nm (2.4 mSkg)
20 Nm (2.0 mSkg)