Inspection - Yamaha TDM850 1996 Service Manual

CRANKSHAFT
4. Remove:
S Main journal bearings 1
NOTE:
Identify each plain bearing position very carefully
so that it can be reinstalled in its original place.
5. Remove:
S Pin 1
S Timing chain guide (intake) 2
6. Remove:
S Connecting rod cap 1
S Connecting rod 2
S Connecting rod bearing 3
NOTE:
Identify each bearing position very careful so that
it can be reinstalled in its original place.

INSPECTION

1. Measure:
S Runout (crankshaft)
Out of specification ! Replace.
Runout:
Less than 0.035 mm
2. Inspect:
S Main journal surfaces
S Crank pin surfaces
S Bearing surfaces
Wear/Scratches ! Replace.
4-55
ENG