Yamaha TDM850 1996 Service Manual page 52

D Pass the carburetor breather hoses and vacuum
hose (#1) through the guide.
E Pass the vacuum hose (#1) through the guide.
F Fasten the coolant reservoir hose with a plastic
clamp.
G Fasten the wire harness, right handlebar switch lead,
meter light lead and headlight lead with a plastic
clamp.
H Fasten the right handlebar switch lead with a plastic
clamp.
I Fasten the throttle cables with a plastic clamp.
CABLE ROUTING
J Pass the coolant reservoir hose over the throttle
cables.
K Fasten the wire harness, right handlebar switch lead,
meter light lead and headlight lead with a plastic band.
L Pass the clutch cable through the guide.
M Pass the carburetor air vent hose through the guide.
N Pass the coolant reservoir breather hose, fuel tank
breather hose and carburetor breather hoses through
the guide.
2-30
SPEC