Yamaha TDM850 1996 Service Manual page 18

Tool No.
90890-01701 Sheave holder
This tool is used to hold the rotor when
loosening and tightening the rotor bolt.
90890-03081 Compression gauge
This gauge is used to measure the
engine compression.
90890-03094 Vacuum gauge
This gauge is needed for carburetor
synchronization.
90890-03112 Pocket tester
This instrument is invaluable for
checking the electrical system.
90890-03113 Engine tachometer
This tool is needed for detecting
engine rpm.
90890-03141 Timing light
This tool is necessary for checking
ignition timing.
90890-04016 Valve guide remover, installer and
reamer (5.5 mm)
These tools are used to remove, install
and rebore the valve guide.
90890-04019 Valve spring compressor
90890-04108 Attachment
These tools are needed to remove and
install the valve assemblies.
90890-04086 Universal clutch holder
This tool is used to hold the clutch when
removing or installing the clutch boss
nut.
90890-06754 Ignition checker
This instrument is necessary for
checking the ignition system components.
Tool name/How to use
1-7
SPECIAL TOOLS
GEN
INFO
Illustration