Switch Inspection; Inspecting A Switch Shown In The Manual - Yamaha TDM850 1996 Service Manual

SWITCH INSPECTION

SWITCH INSPECTION
SWITCH INSPECTION
Use a pocket tester to check the terminals for con-
tinuity. If the continuity is faulty as any point, re-
place the switch.
Pocket tester:
90890-03112
NOTE:
S Set the pocket tester to "0" before starting the
test.
S The pocket tester should be set to the "
range when testing the switch for continuity.
S Turn the switch on and off a few times when
checking it.
INSPECTING A SWITCH SHOWN IN
THE MANUAL
The terminal connections for switches (main
switch, handlebar switch, engine stop switch, light
switch, etc.) are shown in a chart similar to the one
on the left.
This chart shows the switch positions in the col-
umn and the switch lead colors in the top row.
For each switch position, "
terminals with continuity.
The example chart shows that:
1 There is continuity between the "Black and
Black/White" leads when the switch is set to
"OFF".
2 There is continuity between the "Red and
Brown" leads when the switch is set to "ON".
8-2
ELEC
1" Ω
" indicates the