Yamaha TDM850 1996 Service Manual page 36

Part to be tightened
Caliper bracket and swingarm
Brake disc and wheel hub (front and rear)
Driven sprocket and rear hub
Bleed screw and brake caliper
Rear brake hose union bolt
Front wheel axle pinch bolt
Brake hose joint and brake hose
Chain puller and locknut
Front fender and front fork
Brake hose joint and front fork
Rear brake caliper and brake hose joint
NOTE:
1. First, tighten the ring nut approximately 48 Nm (4.8 mSkg) by using the torque wrench, then loosen the
ring nut completely.
2. Retighten the ring nut to specification.
MAINTENANCE SPECIFICATIONS
g
2-14
SPEC
Tightening
Thread
torque
size size
Nm mSkg
M10 35 3.5
M8 20 2.0
M10 60 6.0
M8 6 0.6
M10 30 3.0
M8 19 1.9
M10 14 1.4
M8 16 1.6
M6 9 0.9
M6 10 1.0
M10 40 4.0
Remarks