FRONT FORK
INSPECTION
1. Inspect:
S Inner fork tube 1
S Outer fork tube 2
Scratches /Bends/Damage ! Replace.
WARNING
Do not attempt to straighten a bent inner fork
tube as this may dangerously weaken the
tube.
2. Measure:
S Fork spring free length a
Over specified limit ! Replace.
Fork spring free length (limit):
500 mm
3. Inspect:
S Cap bolt
Bend/Damage ! Replace.
ASSEMBLY
1. Install:
S Damper rod
CAUTION:
Allow the damper rod to slide slowly down the
inner tube until it protrudes from the bottom,
being careful not to damage the inner tube.
7-37
CHAS