Setup - Yamaha CL5 Reference Manual

Recording into a project
1.
In the Function Access Area, press the RECORDER button to access the RECORDER
screen.
2.
Press the Nuendo Live tab in the upper right of the screen.
The Nuendo Live screen will appear.
F
G
7 8 9 0 A B
The screen shows the following items.
1
Nuendo meter display field
This shows the channel levels of Nuendo Live.
2
PEAK CLEAR button
Clears the peak levels indicated by the peak hold function.
3
Marker list field
Lists the marker information recorded in the current Nuendo Live project.
The markers can be selected by pressing the on-screen list or by using the multifunction knobs.
4
Nuendo Live SETUP button
This button will be used in future updated versions. It has no function in V1.1 or earlier.
5
DANTE INPUT PATCH button
Press this to access the DANTE INPUT PATCH screen (see
1
2
3
4
5
6
C D E H
page 136).
6
Location information display
This displays information for the current location of the Nuendo Live project. You can press the
button at the right to switch the time display format.
■ Transport field
Here you can operate the transport of Nuendo Live.
7
GO TO PROJECT START button
Returns the location to the start of the project.
8
GO TO PREVIOUS MARKER button
Returns the location to the previous marker.
9
GO TO NEXT MARKER button
Advances the location to the next marker.
0
GO TO PROJECT END button
Advances the location to the end of the project.
A
CYCLE button
Turns repeat on/off for the project.
B
STOP button
Stops playback/recording of the project.
C
PLAY button
Starts playback of the project.
D
RECORD button
Starts/stops recording of the project.
E
EASY RECORDING button
Immediately starts recording all tracks.
Pressing this button will reset the current location to the end point of the latest recording, place
all tracks in recording mode, start recording, and then display and lock the recording panel.
Recording will start retroactively by the specified time duration (default: 10 seconds).
F
ADD MARKER button
Adds a marker to the project at the current location.
G
RECALL LINK button
Specifies whether a marker will be created when you recall a scene. If this function is turned on,
the button will be lit.
H
Record lock button
Turns recording status lock on/off.
This prevents recording from being accidentally stopped during recording.
NOTE
Transport functions can also be controlled from USER DEFINED keys. (see
184
Recorder
page 164)
Reference Manual