Midi Setup - Yamaha CL5 Reference Manual

MIDI/GPI screen (MIDI SETUP page)
You can select the type of MIDI messages that will be transmitted and received, and choose
the port that will be used.
1
2
4
6
7
1 PORT/CH field
Enables you to select the port and MIDI channel that will be used to transmit and receive
MIDI messages.
• Tx PORT/Tx CH..................... Press these buttons to open windows in which you can
respectively select a port and MIDI channel to transmit
MIDI messages.
• Rx PORT/Rx CH .................... Press these buttons to open windows in which you can
respectively select a port and MIDI channel to receive
MIDI messages.
NOTE
When transmitting or receiving Parameter Changes, the channel number you specify here is used
as the device number (a number that identifies the transmitting or receiving unit).
2
PROGRAM CHANGE field
Enables you to switch MIDI Program Change message transmission and reception on or
off.
• Tx ........................................... Switches program change transmission on/off.
• Rx........................................... Switches program change reception on/off.
• ECHO..................................... Switches on or off echo output of Program Change
messages. (If this function is on, Program Change
messages received from an external device will be
retransmitted without modification.)
3
PROGRAM CHANGE MODE field
Enables you to select the Program Change transmit/receive mode.
• SINGLE.............. If this button is on, Program Changes will be transmitted and
• MULTI ................ If this button is on, program changes will be transmitted/received on
• OMNI.................. If this button is on, Program Changes on all MIDI channels will be
• BANK................. If this button is on, Bank Select messages can be transmitted and
3
4
CONTROL CHANGE field
Enables you to switch MIDI Control Change message transmission and reception on or
5
off.
• Tx....................... Switches control change transmission on/off.
• Rx ...................... Switches control change reception on/off.
• ECHO................. Switches on or off echo output of Control Change messages. (If this
5
CONTROL CHANGE MODE field
This field enables you to select the Control Change transmission/reception mode.
• NRPN button ..... If this button is on, the CL mix parameters will be transmitted/
• TABLE button ... If this button is on, the CL mix parameters will be transmitted/
6
PARAMETER CHANGE field
Enables you to turn transmission/reception of SysEx (system exclusive) messages on or
off. (These are special messages used to control the parameter of the CL console.)
• Tx....................... Switches parameter change transmission on/off.
• Rx ...................... Switches parameter change reception on/off.
• ECHO................. Switches on or off echo output of Parameter Change messages. (If
7 OTHER COMMAND field
Switches on or off echo output of other MIDI messages. (If this function is on, other
MIDI messages received from an external device will be retransmitted without
modification.)
166
received on a single MIDI channel (Single mode).
multiple MIDI channels (Multi mode).
received in Single mode. Multi mode transmission/reception and
Single mode transmission are disabled.
received in Single mode. (Bank Select messages switch the group
of Program Change messages to be used.)
function is on, Control Change messages received from an external
device will be retransmitted without modification.)
received as NRPN messages on one MIDI channel (NRPN mode).
received as Control Change messages on one MIDI channel
(TABLE mode).
this function is on, Parameter Change messages received from an
external device will be retransmitted without modification.)
MIDI
Reference Manual