Yamaha CL5 Reference Manual page 244

FUNCTION PARAMETER 1 PARAMETER 2
EFFECT RACK1–8
PREMIUM RACK1A
PREMIUM RACK1B
EFFECT
BYPASS
:
PREMIUM RACK8A
PREMIUM RACK8B
LATCH —
GAIN KNOB
FUNCTION
UNLATCH —
INC
GEQ FREQ
—
BANK
DEC
LATCH
GPI OUT PORT1–PORT5
UNLATCH
HELP — —
SELECTED CH VIEW —
OVERVIEW —
HOME
TOGGLE —
METER PEAK HOLD ON —
PROGRAM CHANGE PGM 0–128
CC 1–31, 33–95,
CONTROL CHANGE
102–119
MIDI
NOTE ON C-2 (0)
NOTE ON :
NOTE ON G 8 (127)
Explanation
Toggle the function of the GAIN knob
(ANALOG GAIN/DIGITAL GAIN). Lit when
DIGITAL GAIN is selected.
Assign the function of the GAIN knob
(ANALOG GAIN/DIGITAL) to DIGITAL GAIN
only while held down.
* However if the GAIN KNOB FUNCTION is
switched to DIGITAL GAIN in the PREFERENCE
screen etc., this will remain lit until the next
time it is pressed.
Adds or removes a frequency bank in the GEQ
EDIT screen.
Toggle the GPI OUT function. Lit when active.
Make GPI OUT active only while pressed.
Opens and closes the HELP pop-up window.
Operating the controllers on the panel
(excluding faders), or controllers on the screen,
while holding down this key will display the
related information.
Displays the SELECTED CHANNEL VIEW screen.
Displays the OVERVIEW screen.
Each press of the key will alternately display the
SELECTED CHANNEL VIEW screen and the
OVERVIEW screen.
Turns the meter's peak hold function on/off. Lit
when on.
Transmit the corresponding MIDI message.
244
FUNCTION PARAMETER 1 PARAMETER 2
MONITOR ON —
SELECTED CH ASSIGN —
STEREO L/R
MONITOR
MONO(C)
LCR
PB OUT
SOURCE SELECT OMNI1-2
OMNI3-4
OMNI5-6
OMNI7-8
DEFINE
MUTE GROUP 1
: —
MUTE
MUTE GROUP 8
MASTER
ALL MUTE —
GO TO PROJECT START
GO TO PREV MARKER
REWIND
FAST FORWARD
GO TO NEXT MARKER
TRANSPORT GO TO PROJECT END
NUENDO
CYCLE
LIVE
STOP
START
REC
EASY RECORDING
PEAK CLEAR —
OSCILLATOR ON —
SELECTED CH ASSIGN —
OSCILLATOR
DIRECT ASSIGN *1)
Appendices
Explanation
Switch MONITOR on/off.
While holding down this key, press the SEL key
of a MIX or MATRIX channel to switch the
assignment on/off. During this time, the [SEL]
LED will be lit if assign is ON, or dark if OFF.
The assignment setting made while holding
down this key will be stored. Pressing the key
again will recall the stored setting. Settings can
be stored in multiple keys to facilitate rapid
assignment switching.
Recall the selected signal to the monitor.
Switch MUTE GROUP MASTER on/off.
Turns all MUTE GROUP MASTER settings on/off
together.
Operate the transport functions of Nuendo
Live.
Clear the peak indicators of the Nuendo Live
screen.
Switch the OSC on/off.
While holding down this key, press a SEL key of
a channel to switch the assignment on/off.
During this time, the [SEL] LED will be lit if
assign is ON, or dark if OFF.
Assign the oscillator to the channel selected
from list 1).
Reference Manual