Yamaha CL5 Reference Manual page 191

4.
Press the port select popup button for the bus for which you want to assign the
port.
The PORT SELECT popup window will appear.
1
This popup window contains the following items.
1
Slot select list
Selects slot 1–3.
2
Port select buttons
Select the port of the specified slot.
5.
Use the slot select list and port select buttons to select the desired slot and output
ports, and then press the CLOSE button.
The port will be assigned to the selected bus.
6.
Repeat steps 4 and 5 to assign ports to other buses.
NOTE
You cannot assign two or more buses to the same output port. If you select a port to which a
signal route has already been assigned, the previous assignment will be canceled.
7.
If you want to use the Cascade Link function to link parameters and events
between two CL consoles, proceed as follows.
7–1. Use the CASCADE COMM PORT field to select the port that will transmit and
receive control signals for cascade link.
You can choose from the following items.
• NONE...........No link operation
• MIDI ............Use MIDI port
• SLOT1 ..........Use SLOT1
NOTE
Control signals for cascade link and MIDI messages cannot share the same port. If you select a
port that is already specified for transmission/reception of MIDI messages, a dialog box will ask
whether it is OK to cancel the existing settings.
7–2. Use the CASCADE LINK MODE buttons to select the item that you want to link.
2
8.
To close the PORT SELECT popup window, press the CLOSE button.
191
You can choose from the following items.
• OFF
No link operation
• CUE
The following cue-related parameters and events will be linked.
• Cue enable/disable
• Cue mode (MIX CUE or LAST CUE)
• Cue point settings for input channels and output channels
• ALL
All linkable parameters and events (including cue-related parameters) will be linked.
• Cue-related parameters and events (see above)
• Scene recall operations
• Scene store operations
• DIMMER (MONITOR screen) operations
• Panel LED and display brightness (SETUP screen) operations
• Master mute group operations
Other functions
Reference Manual