I/O Rack And External Head Amp; Using An I/O Rack; Remotely Controlling An I/O Rack - Yamaha CL5 Reference Manual

I/O rack and external head amp

This chapter explains how to use an I/O rack or an external head amp that is connected to the CL series
console.

Using an I/O rack

CL series consoles enable you to remotely control channel parameters of an I/O rack (such as an Rio
series product) connected to the Dante connector.
For details on connecting the CL series console to an I/O rack, refer to the "Connecting to I/O racks"
section in the separate Owner's Manual.

Remotely controlling an I/O rack

You can use a CL series console to control an I/O rack that is connected to the console's Dante
connector.
1.
Connect the CL series console to an I/O rack unit.
For details, refer to the "Connecting to I/O racks" and "Quick Guide" sections in the separate
Owner's Manual.
2.
In the Function Access Area, press the RACK button to access the VIRTUAL RACK
screen.
3.
At the top of the VIRTUAL RACK window, press the I/O RACK tab to display the
I/O RACK field.
The I/O RACK field includes the following items.
1 2
1
Display switch button
Press this button to scroll the entire screen so that the corresponding I/O rack will be listed at the
top of the window. Use this button if you want to view an I/O rack that is currently hidden outside
the screen. If you press and hold down the button, all LEDs for the corresponding I/O rack will
blink.
2
ID/Model name display
Indicates the ID number and model name of the I/O rack, and also the on/off status of the master
+48V phantom power on the connected device.
135
I/O rack and external head amp
Reference Manual