Monitor - Yamaha CL5 Reference Manual

3.
Press the popup button or the meter field to open the MONITOR popup window.
In the MONITOR popup window you can make detailed settings for monitoring. The popup
window includes the following items.
3
2 4
1
5 A
■ SOURCE SELECT field
This field enables you to select the source signal to the MONITOR bus.
1
Source selection buttons
Select one of the following as the signal source that will be output to the MONITOR bus.
STEREO L/R STEREO L/R channel signals
MONO (C)
MONO channel signal
LCR STEREO L/R + MONO channel signals
OMNI 1–2 – 7–8 OMNI IN jacks 1–8 signals (per two channels)
PB OUT Recorder's PLAYBACK OUT signals
DEFINE The signal(s) selected in the ASSIGN field
B
6 7 8
9
D
E
0 C
■ DIMMER field
This field enables you to make settings for the Dimmer function, which temporarily attenuates monitor
signals.
2
DIMMER knob
Adjusts the amount by which monitor signals will be attenuated when the Dimmer function is on.
3
DIMMER ON/OFF button
Switches the Dimmer function on or off.
4
TALKBACK DIMMER LEVEL knob
Adjusts the amount by which monitor signals will be attenuated when talkback is on.
5
TALKBACK DIMMER ON/OFF indicator
Indicates the on/off status of the dimmer function for talkback.
6
PHONES LEVEL LINK button
Enables you to link the signal level at the PHONES Out jack to the monitor signal level. Turn on
this button to adjust the level of signals sent to the PHONES Out jack by using the MONITOR
0
FADER LEVEL knob ( ) or the fader (
7
CUE INTERRUPTION button
Press this button to interrupt the cue signal with the monitor signal. If this button is on and the
cue is enabled, the cue signal will be sent to the monitor output. With the factory default settings,
this function is turned on. If you do not wish to send the cue signal to the monitor output, switch
this button off.
8
MONO MONITOR button
Turn on this button to switch the monitor output signal to mono.
9
MONITOR OUTPUT button
Switches the monitor output on or off.
■ MONITOR FADER field
0
MONITOR FADER LEVEL knob
Indicates the monitor level. Press this knob so that you will be able to control the monitor level by
using the multifunction knob in the Centralogic section.
A
FADER ASSIGN indicator
Indicates the fader(s) to which the monitor level is assigned. Indicator assignments are as follows:
MASTER A MASTER A fader only
MASTER A+ MASTER A, as well as MASTER B fader and Custom fader bank
MASTER B
MASTER B fader only
MASTER B+ MASTER B, as well as Custom fader bank
CUSTOM One of the Custom fader bank faders
CUSTOMs Multiple Custom fader bank faders
97
Monitor and Cue functions
A
) to which this knob function has been assigned.
Reference Manual