Yamaha CL5 Reference Manual page 22

INSERT/DIRECT OUT popup window (8ch)
1
2
3
4
1
Channel select button
Selects the channel to set. The channel icon, color, and number appear on the button.
2
INSERT OUT button
Press this button to open the PORT SELECT popup window, in which you can select an output
port. The name of the currently-selected port appears on the button.
3
INSERT ON/OFF button
Switches the insert on or off. The currently-specified insert point setting appears above the
button.
4
INSERT IN button
Press this button to open the PORT SELECT popup window, in which you can select an input
port. The name of the currently-selected port appears on the button. You can also view the insert-
in level by checking the indicator located to the right of the port button (that is displayed as an
option).
4.
Access either the one-channel or the eight-channel INSERT/DIRECT OUT popup
window, and then press the INSERT OUT popup button.
The PORT SELECT popup window will appear, allowing you to select the output port used for
insert-out. The window includes the following items.
1
1
Category select list
Selects the category of output port shown in the popup window. The categories correspond to the
following output ports. They vary depending on the channel type.
• OMNI .......................................... OMNI1–OMNI8
• SLOT1 ......................................... SLOT1(1)–SLOT1(16)
• SLOT2 ......................................... SLOT2(1)–SLOT2(16)
• SLOT3 ......................................... SLOT3(1)–SLOT3(16)
• GEQ RACK ................................ GEQ1L(A)–GEQ16R(B) (MIX, MATRIX, STEREO, and
• EFFECT RACK.......................... FX1L(A)–FX8R(B)
• PREMIUM RACK..................... PR1L(A)–PR8R(B)
2
Output port select buttons
These buttons assign the output port that will be used as insert-out for the currently-selected
channel.
NOTE
If a rack in which a GEQ or Premium Rack is mounted is specified as the insert-out or insert-in,
the other patch point will automatically be assigned to the same rack. Also, insert mode will
automatically be switched on. Additionally, if you defeat the insert-out or insert-in of a rack in
which a GEQ or Premium Rack is mounted, the other patch point will automatically be defeated
and at the same time insert mode will automatically be switched off.
22
Input and output patching
2
MONO channels only)
Reference Manual