System Setup; Record Mode - Yamaha SH-01 Owner's Manual

System Setup

The SH-01's system settings are explained below.

Record Mode

Sets the conditions (file type, bit rate) for recording.
* The sampling rate is fixed at 44.1kHz, and audio data is fixed at 16-bit.
1
Press and hold the [DISPLAY/MENU] button to display the system setup menu ("MENU"
appears on the top half of the display).
2
Use the [–]/[+] buttons to display "RECORD MODE" on the bottom half of the display, then
press the [ENTER] button.
MENU
RECORD MODE
3
The record mode setup display appears.
RECORD MODE:
MP3-192k
4
Use the [–]/[+] buttons to set the record mode.
The record mode (file type, bit rate) can be set as described below.
MP3-64k, MP3-96k, MP3-128k, MP3-192k, WAV
Record Mode
MP3-64k
MP3-96k
MP3-128k
MP3-192k
WAV
* MP3 files using a higher bit rate deliver greater audio quality.
* Compared to MP3 files, WAV files offer greater audio quality however file size is larger (shortening
available record time).
5
Press the [ENTER] button to appoint the setting and return to the main display.
38
-/+,ENT
-/+,ENT
Available recording time according to memory card size
16M 32M
32 64
21 42
16 32
10 21
1 3
(approximately)
64M 128M
128 256
85 170
64 128
42 85
6 12 unit : min