Yamaha CL5 Reference Manual page 64

3
DCA group assign field
This area displays the channels assigned to the currently-selected DCA group.
While this window is displayed, press the [SEL] key for the channel that you want to assign to the
DCA group. The on-screen fader for that channel will turn yellow and the channel will be
assigned to the DCA group. Press the same [SEL] key once again if you want to remove the
channel from the group.
4
DCA group select button
Selects the DCA group that you want to assign.
NOTE
• In the case of the CL3/CL1, faders that do not exist on those models will not be shown.
• If the [DCA 1–8] key or [DCA 9–16] key has been selected in the Centralogic section, you can
access the DCA/MUTE GROUP ASSIGN MODE popup window by pressing the [SEL] key twice
in rapid succession.
In this case, the DCA/MUTE GROUP ASSIGN MODE popup window will appear with the
corresponding DCA GROUP 1–16 button selected for that DCA group.
3.
Use the DCA GROUP 1–16 buttons to select the DCA group to which you want to
assign channels.
4.
Use the [SEL] keys in the INPUT section or ST IN section to select the channels that
you want to assign to the group (multiple selections are allowed).
The [SEL] keys of the assigned channels will light, and the corresponding channels will be
highlighted in yellow in the DCA group assign field of the window.
To cancel an assignment, press a lit [SEL] key once again to make it go dark.
5.
Assign channels to other DCA groups in the same way.
NOTE
You can assign a single channel to more than one DCA group. In this case, the value will be the
sum of the levels of all assigned DCA group faders.
6.
When you finish making assignments, press the CLOSE button to close the popup
window, and press the × symbol in the Function Access Area (CH JOB display).
You will return to the previous screen. The DCA/MUTE GROUP field of the OVERVIEW screen
indicates the DCA group(s) to which each channel is assigned. Numbers that are lit yellow in the
upper and middle rows of this field indicate the DCA groups to which that channel belongs.
NOTE
You can also access the DCA/MUTE GROUP ASSIGN MODE popup window by pressing the
DCA/MUTE GROUP field in the OVERVIEW screen.
■ Selecting the DCA groups to which a specific channel will belong
1.
Press a [SEL] key to select the input channel for which you want to make
assignments.
2.
Press a knob in the SELECTED CHANNEL section to access the SELECTED CHANNEL
VIEW screen.
On this screen you can view all mix parameters for the currently-selected channel.
3.
Use the DCA group select buttons to select the DCA group(s) to
which the currently-selected channel will be assigned (multiple
selections are allowed).
4.
Select the DCA group(s) for other channels in the same way.
64
Grouping and linking
Reference Manual