Playing Back Audio Files From A Usb Flash Drive - Yamaha CL5 Reference Manual

NOTE
The word clock rate at which the CL series console is currently operating will automatically be
selected as the sampling rate for the audio file.
7.
Press the REC (●) button located at the bottom of the screen.
You will use the transport section to perform record, play, and stop operations for the recorder.
8.
To start recording, press the PLAY/PAUSE (
screen.
During recording, the REC (●) button and the PLAY/PAUSE (
field will indicate the elapsed time.
9.
To stop recording, press the STOP (■) button.
The audio file will be saved to the USB flash drive.
NOTE
• In the default state, the recorded audio file will be saved in the SONGS folder within the YPE
folder. However, you may also specify a folder of a level below the SONGS folder.
• The recorded file will be given a default title and file name. You can change this later.
10.
To audition the recorded content, proceed as follows.
10–1. Press the PLAY/PAUSE (
The recorded content will be played back via the input channel you specified in step 3.
10–2. To stop playback, press the STOP (■) button.
) button in the lower part of the
) button will light. The TIME
) button.

Playing back audio files from a USB flash drive

You can play back audio files that have been saved on your USB flash drive. In addition to files that were
recorded on the CL series console, you can also play files that were copied from your computer to the
USB flash drive.
The three types of file format that can be played are MP3 (MPEG-1 Audio Layer-3), WMA (Windows
Media Audio), and AAC (MPEG-4 AAC). The playable sampling rates are 44.1 kHz and 48 kHz. The
supported bit rate ranges from 64 kbps to 320 kbps.
1.
Connect a USB flash drive that contains the audio files to the USB connector.
NOTE
If you want to play back an audio file, you must save it in the SONGS folder within the YPE folder,
or in a folder you have created below the SONGS folder. Files located in other folders and files of
unsupported formats will not be recognized.
2.
In the Function Access Area, press the RECORDER button to access the RECORDER
screen.
3 5 4
2
6 7 8
180
1
A
0
9
Recorder
Reference Manual