Oscillator - Yamaha CL5 Reference Manual

4
OSCILLATOR ASSIGN field
An indicator lights to indicate the currently-selected oscillator output destination (input channels
or buses). Use the tabs on the left to select channels or buses to display.
NOTE
In the case of the CL3/CL1, channels that do not exist on those models will not be shown.
5
OSCILLATOR OUTPUT button
Turns the oscillator output on or off.
2.
Press the popup button or the ASSIGN field to open the OSCILLATOR popup
window.
In this popup window, you can make detailed settings for the oscillator.
1 2
3
1
OSCILLATOR MODE buttons
Select one of the following three oscillator operating modes:
SINE WAVE When the oscillator is turned on, a sine wave will be output continuously.
PINK NOISE When the oscillator is turned on, pink noise will be output continuously.
BURST NOISE When the oscillator is turned on, pink noise will be output intermittently.
2
Parameter field
Enables you to set the oscillator parameters. The controllers and their functions in this field vary
depending on the selected mode. You can adjust the values by using the multifunction knobs.
Mode = SINE WAVE
• LEVEL knob.............. Indicates the output level of the sine wave.
• FREQ knob................ Indicates the frequency of the sine wave.
Mode = PINK NOISE
5
• LEVEL knob.............. Indicates the output level of the pink noise.
• HPF knob................... Indicates the cutoff frequency of the HPF that processes pink noise.
4
• LPF knob.................... Indicates the cutoff frequency of the LPF that processes pink noise.
Mode = BURST NOISE
• LEVEL knob, HPF knob, and
LPF knob.................... Same as in PINK NOISE mode.
• WIDTH...................... Indicates the length of noise being output intermittently.
• INTERVAL ................ Indicates the length of silence between noise bursts.
Level
106
Use the button below the knob to switch the HPF on or off.
Use the button below the knob to switch the LPF on or off.
Pink noise output
INTERVAL
WIDTH
Turn BURST NOISE button is on.
Talkback and Oscillator
Time
Reference Manual