Using An Mbcl Meter Bridge (Optional) On The Cl3 Or Cl1 Console - Yamaha CL5 Reference Manual

Using an MBCL meter bridge (optional) on the CL3
or CL1 console
If the optional meter bridge (MBCL) is installed on the CL3 or CL1 console, you will always be able to
view the output levels of MIX, MATRIX, STEREO, MONO, and CUE channels.
The MBCL meters indicate the MIX channel and MATRIX channel output levels in 12-segment steps
(OVER, –3 dB, –6 dB, –9 dB, –12 dB, –15 dB, –18 dB, –24 dB, –30 dB, –40 dB, –50 dB, –60 dB).
You can select the metering point (the point at which the level is detected) from the following choices.
For information on how to change the metering point, refer to the section
screen" on page 108.
• PRE EQ .......................Immediately before the EQ
• PRE FADER ...............Immediately before the fader
• POST ON ...................Immediately after the [ON] key
"Operations in the METER
110
Meters
Reference Manual