Setup - Yamaha CL5 Reference Manual

5.
Rotate the multifunction knob to select the user authentication key for the user as
whom you want to log in.
For details about loading files from the USB flash drive, refer to
drive" on page 173.
6.
Press the LOAD button.
If no password has been set, you will simply be logged-in. If a password has been set, a keyboard
window will appear, allowing you to enter the password.
NOTE
• If you have selected a user authentication key that was created on a different CL series console,
a keyboard window will appear, allowing you to enter the Administrator password of the CL series
console that you will be using. (If the Administrator passwords are identical, this window will not
appear.) When you enter the correct Administrator password, another keyboard window will
appear, allowing you to enter the password for the selected user.
• If you re-save the user authentication key, you will not be asked for the Administrator password
the next time. Refer to "Editing a user authentication
7.
Enter the password and press the OK button.
If the password was incorrect, a message of "WRONG PASSWORD" will appear near the bottom
of the screen.
"Loading a file from the USB flash
key" on page 160.
159
Changing the password
Follow the steps below to change the password of the logged-in user. A change in the Administrator
password is updated immediately. A change in a User password will be discarded if the user simply logs
out. The change must be applied to the user authentication key before the user logs-out. The Guest
account does not have a password.
1.
In the Function Access Area, press the SETUP button to access the SETUP screen.
2.
Press the PASSWORD CHANGE button.
A keyboard window will appear, allowing you to enter a password.
3.
Enter the current password and press the OK button.
When you enter the correct password, a keyboard window will appear, allowing you to enter the
new password.
4.
Enter the new password in the NEW PASSWORD field, then enter the same
password in the RE-ENTER PASSWORD field for verification, and finally press the
OK button.
If the two passwords that were entered match, the new password will be set.
User settings (Security)
Reference Manual