Setup - Yamaha CL5 Reference Manual

NOTE
• If you have connected a third-party device, the upper row will indicate "???" and the channel
number (decimal).
• If no Dante Audio Channel Label has been specified, the lower row will indicate nothing.
• You can set the Dante Audio Channel Label using Audinate "Dante Controller" software. For the
latest information, refer to the Yamaha pro audio website.
http://www.yamahaproaudio.com/
5.
Press the AUTO SETUP button.
A confirmation popup dialog will appear to confirm the execution of auto patching. Press the OK
button to execute auto patching.
6.
If you want to edit individual patches, press the port select button.
The PORT SELECT popup window appears.
1 3
1
I/O rack list
Enables you to select the I/O rack for which you want to set the input port.
2
Port select buttons
Select the input port.
3
CLOSE button
Completes the setting and closes the popup window.
7.
To remotely control a head amp on the I/O rack, press the rack in which the I/O
rack has been mounted.
The I/O RACK HA popup window will appear. In this window, you can remotely control the head
amp on the I/O rack from the CL series console by using the on-screen knobs and buttons or the
multifunction knobs on the top panel.
2
3
4
5
6
1
+48V MASTER
Indicates the on/off status of the I/O rack master phantom power. (Switching this on or off is
performed on the I/O rack itself.)
2
2
+48V button
Switches phantom power on or off for each channel.
3
GAIN knob
Indicates the gain of the head amp on the I/O rack. To adjust the value, press the knob to select it,
and use multifunction knobs 1–8. The level meter located immediately to the right of the knob
shows the input level of the corresponding port.
4
GC button
Switches on or off the Gain Compensation function that keeps the constant signal level on the
audio network.
5
FREQUENCY knob/HPF button
These controllers switch on or off the high-pass filter built in the head amp of the I/O rack, and
adjust its cutoff frequency. If you press the FREQUENCY knob to select it, you will be able to
adjust it using the corresponding multifunction knob.
6
Displayed port switch tabs
These tabs switch the port that is displayed in the I/O RACK HA popup window.
7
GC ALL ON button/GC ALL OFF button
Switch Gain Compensation on or off for all input channels simultaneously.
137
I/O rack and external head amp
7
1
Reference Manual