Yamaha CL5 Reference Manual page 239

Parameter
Pan/balance
Pan Mode
On
LCR CSR
Mode
On
Fader
Mute Assign
DCA Assign
Fade Time, On
Channel Link
Cue
Key In Cue
Mute Safe
Recall Safe, Focus Recall, Global Paste
*1 These parameters can be linked between L and R of ST IN channels 1–8.
*2 Applies to parameters for which the MIX channel 1–24 individual Send Parameter setting and the item in the table are both enabled.
*3 Applies to parameters for which the MATRIX channel 1–8 individual Send Parameter setting and the item in the table are both enabled.
*4 These parameters are available if "FADER/ON" or "PROCESSING" for the Send source channel is set to ON. At that time, "WITH SEND" for the Send destination channel must also be set to ON.
*5 Applicable to parameters that function only when ALL is selected.
*6 Applicable only to On/Off.
*7 Valid when assigned to either a Send source channel or a Send destination channel.
*8 Settings marked GLOBAL in this table apply to all channels; these settings are GLOBAL RECALL SAFE, FOCUS PARAMETER, and GLOBAL PASTE for PATCH/NAME.
*9 Applies to ALL only when using GLOBAL PASTE, and only to ON/OFF.
*10 Operates differentially
*11 Balance only
RECALL SAFE, FOCUS RECALL, GLOBAL PASTE
*1
CHANNEL LINK
Stereo
ALL
*11
O
O
O O
O TO STEREO O
O TO STEREO O
O TO STEREO O
O INPUT CH ON O
*10 *10
O
O INPUT FADER
O INPUT MUTE O
O INPUT DCA O
*6
O
O
O
O
O
O
*8
Parameter Select button
INPUT TO ST
*5
*5
*5
*5
INPUT CH ON
INPUT FADER
*5
*5
*9
GLOBAL CH LINK
239
Channel
USER LEVEL
Library
INPUT FADER/ON O
INPUT PROCESSING O
INPUT PROCESSING O
INPUT PROCESSING O
INPUT PROCESSING O
INPUT FADER/ON O
INPUT FADER/ON O
MUTE GROUP ASSIGN O
DCA GROUP ASSIGN O
*6
STORE
O
Appendices
Reference Manual