Yamaha CL5 Reference Manual page 187

C
DANTE SETUP button
Press this button to open the DANTE SETUP popup window. This window enables you to make
various audio network settings (console ID setting; SECONDARY PORT functionality setting;
audio bit rate; latency setting; DANTE device ID and device type settings for devices controlled
via the I/O RACK screen).
■ BUS SETUP field
This field enables you to make bus-related settings.
D
BUS SETUP popup button
Press this button to open the BUS SETUP popup window, in which you can make MIX bus/
MATRIX bus-related settings.
■ DATE/TIME popup button
Press this button to open the DATE/TIME popup window, in which you can set the date and time.
■ NETWORK popup button
Press this button to open the NETWORK popup window, in which you can set the network address.
■ Indicator field
This field displays various information about the console's status.
E
BATTERY indicator
Indicates the status of the internal battery.
NOTE
The LOW or NO indication will appear if the battery runs down. In this case, immediately contact
your Yamaha dealer or a Yamaha service center listed at the end of the operating manual
(separate document) to have the backup battery replaced.
F
POWER SUPPLY indicator
Indicates the currently-running power supply: INT (internal) or EXT (PW800).
G
Version indicator
Indicates the version number of the main CPU, sub CPU, and DANTE module.
■ CONSOLE LOCK button
This button executes the Console Lock function. If the console password has been set, pressing this
button will open the AUTHORIZATION popup window. Enter the correct password to execute
Console Lock.
If the console password has not been set, pressing this button will execute the Console Lock
immediately.
■ CONTRAST/BRIGHTNESS field
This field enables you to set the LCD brightness and contrast.
H
BANK A/BANK B buttons
Select a bank to which you want to save the brightness and contrast settings. You can save two
different settings in bank A and B, and switch between them if desired.
I
CONTRAST NAME knob
Adjusts the contrast of the channel name display.
J
BRIGHTNESS NAME knob
BRIGHTNESS CH COLOR knob
BRIGHTNESS SCREEN knob
BRIGHTNESS PANEL knob
BRIGHTNESS LAMP knob
These knobs enable you to adjust the brightness of the channel name display, channel color,
display, top panel LEDs, and the lamp connected to the LAMP connector.
187
Other functions
Reference Manual