Yamaha CL5 Reference Manual page 177

4
Meters
Indicate the level of the signals input to the recorder.
5
PLAYBACK OUTPUT L/R buttons
Press these buttons to open the CH SELECT popup window, in which you can select the signals
patched to the recorder's L/R output channels for playback.
6
PLAYBACK OUTPUT GAIN knob
Sets the level of the signal output to the recorder.
7
PLAYBACK OUTPUT CUE button
Press this button to audition the signal output from the recorder.
NOTE
You cannot turn on this button and the RECORDER INPUT CUE button simultaneously.
8
Meters
Indicate the level of the signals output from the recorder.
3.
To assign channels to the recorder inputs, press the CH INPUT popup button L or R.
The CH SELECT popup window will appear.
1
1
Category list
Enables you to select the type of channels.
2
Channel select buttons
Select the channels that will be patched to the USB memory recorder's inputs.
• MIX 1–24....................MIX channels 1–24
• MTRX 1–8..................MATRIX channels 1–8
• ST L/R .........................STEREO channel L/R
• ST L+C ........................STEREO channel L mixed with the MONO (C) channel
• ST R+C ....................... STEREO channel R mixed with the MONO (C) channel
• MONO........................ MONO channel
• CH1–72 ...................... Direct output of an INPUT channel 1–72
NOTE
In the case of the CL3/CL1, channels that do not exist on those models will not be shown.
4.
Use the category list and the port select buttons to select the channel that you
want to patch to the USB memory recorder output.
If you select a channel to which another port is already patched, a dialog box will ask you to
confirm the patch change. Press the OK button in the dialog box.
5.
When you have finished assigning the channel, press the CLOSE button.
You will return to the RECORDER screen.
6.
Assign a channel to the other input in the same way.
NOTE
The USB memory recorder always records and plays back in stereo. If you want to record in
monaural, with the same signal for left and right, you must assign both of the recorder inputs to
the same channel.
7.
To assign channels to the recorder outputs, press the PLAYBACK OUT popup
button L or R.
The CH SELECT popup window will appear.
2
1
1
Category List
Enables you to select the type of channels.
177
Recorder
2
Reference Manual