Input And Output Patching; Cl Console Internal Patching And Dante Audio Network Patching - Yamaha CL5 Reference Manual

Input and output patching

This chapter explains how to edit the input patching and output patching, how to connect inserts, and
how to use direct outputs.
CL console internal patching and Dante audio
network patching
The following diagram shows the signal flow through the CL series console, I/O racks, and Dante audio
network.
I/O rack
ID #3
Dante Network
Up to 512 channels
(logical value)
Dante-MY16-AUD
OMNI MY MY MY
8 16 16 16
INPUT PATCH
CL series console
I/O rack
ID #1
I/O rack
ID #2
SW
Dante
64/512
patching
"Dante" (ports)
64
CL internal
patching
Input patching
CL series consoles and I/O racks feature two types of patching: Dante audio network patching and CL
console internal patching.
For Dante audio network patching, you will use the DANTE INPUT PATCH popup window. In this
window, you can patch CL console and I/O rack inputs. Sixty-four (64) channels can be input from a
Dante audio network to a CL series console. You can choose up to 64 channels from maximum of 512
channels (logical value) of Dante audio network signals. Select the I/O racks (within 64 channels) that
you want to control from the CL series console.
Then, route the input signals (that were patched in the DANTE INPUT PATCH popup window) to
channels on the CL series console. To do this, choose input ports from DANTE 1–64 in the GAIN/
PATCH popup window.
NOTE
By default, DANTE 1–64 are assigned to input channels 1–64.
Output patching
Use the OUTPORT SETUP popup window to patch CL console's output channels and Dante audio
network. In this window, assign output channel signals to DANTE 1–64 ports.
NOTE
By default, MIX 1–24 are assigned to DANTE 1–24, MATRIX 1–8 are assigned to DANTE 25–32,
STEREO L/R are assigned to DANTE 33/34, and MONO is assigned to DANTE 35.
Next, patch the output signals from DANTE 1–64 (assigned in the OUTPORT SETUP popup window)
to I/O rack outputs. Use the I/O RACK OUTPUT PATCH popup window to make these assignments.
15
Input and output patching
Reference Manual