Selected Channel Section; About The Selected Channel Section; Operations In The Selected Channel Section - Yamaha CL5 Reference Manual

SELECTED CHANNEL section

This chapter explains how to use the SELECTED CHANNEL section and the SELECTED CHANNEL
VIEW screen to control the selected channel.

About the SELECTED CHANNEL section

The SELECTED CHANNEL section located to the left of the display corresponds to the mixer module
on a conventional analog mixer, and enables you to manually adjust all the major parameters of the
currently-selected channel.
Operations in this section will affect the channel that was most recently selected by its [SEL] key. If you
have assigned an ST IN channel or STEREO channel to a single channel strip, either the L or the R
channel will be selected, and the major parameters for L and R channels will be linked. You can use the
knobs on the panel to control mix parameters such as head amp gain, HPF/EQ settings, the threshold
setting of the dynamics processors, pan/balance settings, and send levels to the MIX/MATRIX buses.

Operations in the SELECTED CHANNEL section

Follow the steps below to perform operations in the SELECTED CHANNEL section.
1.
Use a [SEL] key to select the channel you want to control.
To select an INPUT, ST IN, STEREO, or MONO channel, press the appropriate [SEL] key in the
INPUT section, ST IN section, or STEREO/MONO MASTER section of the top panel.
To select a MIX or MATRIX channel, use the
Bank Select keys to recall the desired channel to
the Centralogic section, and then press the [SEL]
key for the desired channel.
The number and name of the currently-selected
channel is shown in the channel select field
located in the Function Access Area of the touch
screen.
NOTE
• If an ST IN channel or STEREO channel has been assigned to a single channel strip, you can
switch between L and R by repeatedly pressing the same [SEL] key.
• You can also switch channels by pressing the channel select field located in the Function Access
Area. Press the left side of the field to select the preceding channel. Press the right side of the
field to select the next channel.
Channel number
Channel name
6
2.
Press one of the knobs in the SELECTED CHANNEL section.
Press a knob in the SELECTED CHANNEL section to display the SELECTED CHANNEL VIEW
screen for the currently-selected channel. If you leave this screen displayed, you will always be able
to view the settings in the screen while operating the knobs in the SELECTED CHANNEL
section.
NOTE
If you have turned on the option "POPUP APPEARS WHEN KNOB(S) PRESSED" on the
PREFERENCE tab (accessed by pressing the SETUP button, then the USER SETUP button),
pressing a knob repeatedly will open or close the popup window (1 ch).
Even if a different screen is selected, the knobs in the SELECTED CHANNEL section will always
affect the currently-selected channel. In this case, a window indicating the value of that parameter
will appear on screen when you operate a knob.
3.
Use the knobs in the SELECTED CHANNEL section and the buttons on the
SELECTED CHANNEL VIEW screen to edit the parameters of the selected channel.
SELECTED CHANNEL section
Reference Manual