Description Of The Software Programs; Nuage Fader Setup - Yamaha NUAGE FADER Ncs500-FD Operation Manual

Description of the
Software Programs

NUAGE FADER Setup

Overview
This software is for configuring the general settings of
Nuage Fader from Nuendo. You can configure settings
such as touch sensitivity or LED brightness. To open this
window, click the Nuendo menu "Devices"  "NUAGE
FADER Setup."
When multiple Nuage Fader units are connected, the
settings are the same on all Nuage Fader units.
Controls and Functions
1 2 3
7
8
!
Knob
1
Adjusts the touch sensitivity of the [Multi function knob].
The larger the number, the higher the sensitivity.
Slider
2
Adjusts the touch sensitivity of the [Touch slider bar]. The
larger the number, the higher the sensitivity.
4 5 6
9
)

Description of the Software Programs

Fader
3
Adjusts the touch sensitivity of the [Fader]. The larger the
number, the higher the sensitivity.
LED Low
4
Adjusts the brightness of the LED (when dimmed). The
larger the value, the brighter the LED.
LED High
5
Adjusts the brightness of the LED (when fully lit). The
larger the value, the brighter the LED.
OLED
6
Adjusts the brightness of the [Channel name display]. The
larger the value, the brighter the LED.
Follow Slider Scroll
7
Turns on and off the function which causes the [Fader]
position to follow scrolling through the channels when you
use the [Touch slider bar]. When this function is off, the
[Fader] position changes only after you stop scrolling.
Motor
8
Turns the motor power of [Fader] on and off. When the
motor power is off, you can change the [Fader] parameter
after the [Fader] parameter value and the [Fader] position
match.
Ch Select
9
Turns on and off the function which allows you to select
channels by touching [Fader].
OLED Off Time
)
Configures the period of time that elapses before the
[Channel name display] is automatically darkened.
User Assignable Settings
!
Assigns the function to the buttons in "USER
ASSIGNABLE section" (page
to select the category. Next, click "Command" to select
the command. When you check a box in "Repeat," the
function will operate continuously when the button is held
down.
NUAGE FADER Operation Manual
19). First, click "Category"
23