Setup - Yamaha CL5 Reference Manual

2
CURRENT SCENE
Specifies the operations that can be performed on the current scene memory.
• INPUT PATCH/NAME ........... Restricts operations for input channel patching and names.
• OUTPUT PATCH/NAME....... Restricts operations for output channel patching and names.
• BUS SETUP................................ Restricts operations for bus setup.
• GEQ RACK/EFFECT RACK/PREMIUM RACK
........................................ Restricts operations for the racks. Press this area to open the
RACK USER LEVEL popup window, in which you can set this
restriction. However, there will be no restriction on operating
the MIDI CLK button displayed for delay-type and
modulation-type effects, or the PLAY/REC button displayed
for the FREEZE effect.
• MUTE GROUP ASSIGN/MASTER
........................................ Restricts operations for mute group assignment and mute
group master.
NOTE
In the case of the CL3/CL1, faders that do not exist on those models will not be shown.
3
SCENE LIST
Specifies the operations that can be performed on scene memories.
• STORE/SORT operations
• RECALL operations
4
LIBRARY LIST
Specifies the operations that can be performed on libraries.
• STORE/CLEAR operations
• RECALL operations
5
FILE LOAD
Specifies the types of file that can be loaded from USB flash drives. The user authentication key
contains the user level, USER DEFINED keys, and Preference settings. Other data is saved in an
"ALL" file.
• USER SETUP (USER DEFINED keys and Preference settings)
• SYSTEM SETUP/MONITOR SETUP
• CURRENT SCENE
• SCENE LIST
• LIBRARY LIST
6
MONITOR SETUP
Specifies the monitor setup operations that can be performed.
• OSCILLATOR
• TALKBACK
7
SYSTEM SETUP
Specifies the system setup operations that can be performed.
• MIXER SETUP
• OUTPORT SETUP
• MIDI/GPI
8
SET ALL/CLEAR ALL button
Permits/clears all items.
4.
Specify the user level by pressing the button for each item that will be permitted.
5.
When you have finished making settings, close the popup window and press the
SETUP button in the Function Access Area.
162
User settings (Security)
Reference Manual