Premium Rack Mounter - Yamaha CL5 Reference Manual

3.
To mount a Premium Rack in the rack, press the RACK MOUNT button for that rack.
The PREMIUM RACK MOUNTER popup window will appear.
4.
Use the MODULE SELECT buttons to select the item you want to mount, and press
the OK button.
There are two ways to mount each processor:
• DUAL ..........................The processor is used on two mono channels.
• STEREO......................The processor is used on one stereo channel.
The DUAL button and STEREO button indicate how many rack space units are occupied by the
Premium Rack processor.
The U76 occupies two rack spaces. Other processors occupy one rack space. If you mount a two-
space Premium Rack processor in the rack, you will be unable to mount any more processors
below those rack spaces. Also, you cannot mount a two-space processor in an even-numbered
rack.
5.
Press the INPUT L button to open the CH SELECT popup window, and select the
insert-out of a channel as the input-source.
For details on the CH SELECT popup window, refer to step 5 of
page 112. Insert-out is now assigned to the L input of the processor.
6.
Press the OUTPUT L button to open the CH SELECT popup window, and select the
insert-in of the same channel as the output-destination.
For details on the CH SELECT popup window, refer to step 6 of
page 112. Insert-in is now assigned to the L output of the processor.
If you are inserting a processor into a channel that handles a stereo source, assign the R channel
insert-out and insert-in to the R input and output of the processor.
7.
Use the Bank Select keys in the Centralogic section to access the OVERVIEW screen
for the channel into which you want to insert the processor.
8.
Press the INSERT/DIRECT OUT field to access the INSERT/DIRECT OUT popup
window.
Make sure that the rack you inserted in the input and output ports is selected. For details on Insert
Out/In, refer to "Inserting an external device into a
9.
Turn on the INSERT ON/OFF button for the channel into which you inserted the
processor.
If it is off, press the button to turn it on. In this state, processor insertion is enabled for the
corresponding channel.
10.
In the Function Access Area, press the RACK button to access the VIRTUAL RACK
window, and use the PREMIUM tab to display the PREMIUM RACK field.
11.
Press the processor rack that you inserted into the channel to open the Premium
Rack popup window.
In this popup window you can edit the processor parameters.
128
Graphic EQ, effects, and Premium Rack
"Virtual rack operations" on
"Virtual rack operations" on
channel" on page 21.
Reference Manual