Yamaha CL5 Reference Manual page 10

■ INSERT field
This field enables you to make insert settings.
1
Popup button
Press this button to open the INSERT/DIRECT OUT 1ch
popup window.
2
ON button
Switches the insert on or off.
3
RACK EDIT popup button
Appears if an effect or Premium Rack is inserted. Press this button to display the edit screen for
the inserted rack.
4
IN indicator
Appears if a port has been assigned to the insert-in patch. It lights when the signal is sent to the
insert-in.
■ DIRECT OUT field
This field enables you to make insert settings.
1
Popup button
Press this button to open the INSERT/DIRECT OUT 1ch
popup window. The Direct Out level value will appear below
the button.
2
ON button
Switches the Direct Out on or off.
■ RECALL SAFE field
This field enables you to make Recall Safe settings.
1
Popup button
Press this button to open the RECALL SAFE popup window.
2
ON button
Switches the Recall Safe status on or off.
3
PARTIAL indicator
Lights only if some of the channel parameters are set to Recall Safe.
■ FADER field
1
This field enables you to view and make settings for the channel on/
off status and the level.
1
2
Fader
Displays the current level.
Use the faders on the top panel to set the levels.
4 3
2
Level indicator
Displays the current level setting by numerical value. If the
signal is clipping at any point in the channel, the ΣCLIP indicator will light.
3
ON button
Switches the channel status on or off. The button is linked with the corresponding [ON] key on
the top panel.
■ DCA/MUTE field
This field enables you to view and select the DCA or mute group to which
the channel is assigned.
1
Tabs
Select DCA or mute as a group to set. Press the selected tab once again
to open the DCA/MUTE GROUP ASSIGN MODE popup window.
1 2
When the DCA group tab is selected:
2
DCA group select buttons
Select the DCA group to which the channel is assigned.
3
Mute group indicators
Indicate the mute group to which the channel is assigned.
1
3
When the mute group tab is selected:
2
4
Mute group select buttons
Select the mute group to which the channel is assigned.
NOTE
If the dimmer level is set to the mute group, this button lights
orange.
5
SAFE button
Temporarily removes the channel from the mute group.
6
DCA group indicators
Indicate the DCA group to which the channel is assigned.
10
SELECTED CHANNEL section
2
3
1
1
3
2
5
6 4
Reference Manual