Preferences - Yamaha CL5 Reference Manual

Preferences

Follow the steps below to make various settings for the CL console operating environment, such as how
popup windows appear, and whether [SEL] key operations will be linked. These settings are changed
for the user who is logged-in, but if you are logged-in as the Administrator, you will also be able to
change the Guest settings.
1.
In the Function Access Area, press the SETUP button to access the SETUP screen.
2.
Press the SETUP button to open the USER SETUP popup window.
1
2
3
4
3.
Press the PREFERENCE tab to access the PREFERENCE page.
If you are logged-in as the Administrator, you can also switch to the PREFERENCE for GUEST
page and make preference settings for the Guest account.
This page includes the following items.
1
STORE/RECALL field
Enables you to turn on or off options related to scene store/recall operations.
• STORE CONFIRMATION
• RECALL CONFIRMATION
If these ON buttons are lit, a confirmation message will appear when you perform a Store or Recall
operation respectively.
2
PATCH field
Enables you to turn on or off options related to patch operations.
• PATCH CONFIRMATION
If this ON button is lit, a confirmation message will appear when you edit an input patch or output
patch.
• STEAL PATCH CONFIRMATION
If this ON button is lit, a confirmation message will appear when you edit an input or output patch
item that is already patched to a port.
3
LOCALE SETUP field
Enables you to select the language used in Help files. Select "EN" to display Help files in English.
4
ERROR MESSAGE field
Enables you to specify whether certain error messages should be displayed.
• DIGITAL I/O ERROR
If this ON button is lit, an error message will appear when a digital I/O error occurs.
• MIDI I/O ERROR
If this ON button is lit, an error message will appear when a MIDI I/O error occurs.
5
PANEL OPERATION field
Enables you to make settings for options related to panel operation.
5
• AUTO CHANNEL SELECT
Specifies whether the corresponding channel will be selected when you operate the [ON] key or
fader for the channel. You can set this parameter separately for INPUT (input channels) and
OUTPUT (output channels).
• [CUE]  [SEL] LINK
Specifies whether channel selection will be linked with cue operations. If the LINK button is on,
channels for which cue operations were performed will be selected.
• [FADER BANK]  [SEL] LINK
Specifies whether channel selection will be linked with fader bank selection. You can set this
parameter separately for INPUT (input channels), OUTPUT (output channels), and CUSTOM
(Custom fader bank).
If the LINK button is on, and you select the corresponding fader bank, the channel in that bank
that was selected most recently will be selected, and its [SEL] key will light.
• IDENTIFY I/O RACK PORT BY [SEL]
Specifies whether to enable a function that allows you to identify the I/O rack port connected to
a channel by pressing the [SEL] key for that channel.
If this ON button is lit, pressing a [SEL] key on the panel will cause the signal indicator to flash
for the port of the I/O rack that is assigned to the corresponding channel by the INPUT PATCH/
OUTPUT PATCH settings.
• POPUP APPEARS WHEN KNOB(S) PRESSED
Specifies whether pressing a knob in the SELECTED CHANNEL section while the SELECTED
CHANNEL VIEW screen is displayed will cause a popup window (1 ch) to appear. If the ON
button is lit, a popup window (1 ch) will open (or close) whenever you press a knob.
163
User settings (Security)
Reference Manual