Ch1-48 - Yamaha CL5 Reference Manual

EQ popup window (CH1-48, CH49-72/ST IN(CL5),
CH49-64/ST IN(CL3), ST IN(CL1), OUTPUT)
This window displays the corresponding input channels (or output channels) simultaneously. This page
is only for display, and does not allow the parameters to be edited. It is useful when you need to quickly
check multiple EQ settings, or when you want to copy and paste EQ settings between distant channels.
1
2
3
1
Channel select button
Selects the channel that you want to control in the SELECTED CHANNEL section. The current
channel icon, number, and color appear on the button.
2
EQ graph
Indicates the total frequency response of the EQ or filter.
3
Tabs
Use these tabs to select a channel that you want to view on the screen.
3.
Access the HPF/EQ popup window (1ch), and then press the EQ ON button to
enable the EQ.
If the HPF/EQ popup window (1ch) is displayed, you will be able to edit all of the EQ parameters.
4.
If you want to use the high-pass filter on an input channel, operate the HPF knob
or HPF ON/OFF button in the HPF/EQ popup window.
Input channels provide a high-pass filter that is independent of the four-band EQ. The HPF ON/
OFF button switches the high-pass filter on or off, and the HPF knob adjusts the cutoff frequency.
NOTE
• Output channels do not feature a high-pass filter that is independent of the EQ. However, you can
turn on the high-pass filter button on the popup window to use the LOW band EQ as a high-pass
filter.
• For both input channels and output channels, you can turn on the low-pass filter button to use the
HIGH band EQ as a low-pass filter.
5.
If you want to copy EQ settings to another channel, or initialize the EQ settings,
use the tool buttons in the HPF/EQ popup window.
For details on how to use these buttons, refer to "Using the tool buttons" in the separate Owner's
Manual.
NOTE
• EQ settings can be saved and recalled at any time using the dedicated library. You can also take
advantage of a wide variety of presets suitable for various instruments or situations.
• You can also access the SELECTED CHANNEL VIEW screen, and use the knobs in the
SELECTED CHANNEL section to edit the EQ and high-pass filter (see
• Even when the HPF/EQ popup window is displayed, you can use the knobs in the SELECTED
CHANNEL section to control the EQ.
57
EQ and Dynamics
page 8).
Reference Manual