Ip Addressing; H Selecting An Ip Addressing Scheme; Configurations Not Running Ip Conservative Software; All Configurations - Paradyne 7974 User Manual

IP Addressing

Selecting an IP Addressing Scheme

Configurations Not Running IP Conservative Software

All Configurations

7900-A2-GB21-00
Your IP addressing scheme depends in part whether the Hotwire 797x
Standalone Termination Unit is running in IP Conservative mode. The unit runs in
IP Conservative mode if it is connected to a DSLAM card running in IP
Conservative mode.
For a configuration not running IP Conservative software, the NTU's network
interface IP address is assigned through the peer IP address of the LTU's
Network Interface menu.
A DSLAM-mounted termination unit is assigned an IP address and subnet
through the DSLAM Configuration
the address is assigned, you can use the ATI to assign:
H
Peer IP address. This address is used as the IP address of the remote unit.
See Table A-1, Network Interface
Options.
H
An IP address for each NMS to act as a trap manager. See Table A-13,
SNMP Traps Options, in Appendix A, Configuration Options.
The NTU obtains its IP address when the PPP link is established over the EOC.
Use the ATI to assign:
H
An IP address for each NMS. See Table A-12,
in Appendix A, Configuration Options.
H
An IP address for the TFTP server you wish to use to upload and download
configurations. See Configuration Loader
Configuration, and the documentation for your TFTP server.
August 2000
DSL Cards Set IP Address menu. Once
Options, in Appendix A, Configuration
SNMP NMS Security
in Chapter 3, Initial Startup and
5
Options,
5-1