Configure Branch; Poll List Branch - Paradyne COMSPHERE 3910 Installation And Operation Manual

The LCD displays the first sequence fault field. (Sequence fault fields range from 1 to 8 and are
identified by a number in the upper right corner.) Press the
The message Modem O.K. appears if no sequence faults have occurred.
To remove sequence fault records from both the LCD and nonvolatile memory, select Clear. The
message Modem O.K. appears.
To exit this function and remain in the Status branch, press the
Top-Level menu, press the

Configure Branch

The Configure branch of the LCD allows you to change and save the modem's configuration
options. For configuration options and DCP configuration procedures, refer to Chapter 4, DCP
Configuration.

Poll List Branch

The Poll List function is not available on Point-to-Point control modems or Multipoint
Tributary modems..
The Poll List (Plist) branch of the Top-Level menu allows you to identify downstream modems in
order to support health and status polling and download broadcasting. The maximum number of
devices is 32 on the secondary channel and 64 on the diagnostic channel.
Status Configure
Display
3910-A2-GN32-30
key.
"Status"
Test
Control
PList
(Tributary
only)
Clear Change Add Acquire
Active
Delete
Skip
November 1996
key to view the remaining fields.
key. To exit and return to the
SubHS Call_Setup Tlk/Data
DCP Operation
Security Remote
3-25