Entering Identity Information - Paradyne HotWire 7976 User Manual

Initial Startup and Configuration

Entering Identity Information

Î
Î
3-4
After accessing your unit for the first time, use the Change Identity screen to
determine SNMP administrative system information that will be displayed on the
Identity screen of the Status branch. To access the Identity screen, follow this
menu selection sequence:
Main Menu Control
main/control/change_identity
System Name: lllQJ98-001
System Location: Bldg. A412, 2nd Floor, Left cabinet
System Contact: C. Parker 800-727-2396 pager 888-555-1212
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Ctrl-a to access these functions, ESC for previous menu
Save
Fields on the Identity screen are null until you enter values. The field values
display 40 characters with a maximum field length of 128 characters. If a field
value is greater than 40 characters in length, use the left or right arrow keys to
view the remaining text. Valid values are any printable ASCII character. ASCII
printable characters include:
Numeric 0–9
Upper or lower case A–Z
Space
All ASCII symbols except the caret (^)
Select Clear to reset a field to a null value.
Procedure
To enter Change Identity screen information:
1. Position the cursor in the System Name field. Enter a name unique in your
network to identify the SNMP managed node (or unit).
The maximum length of System Name is 128 characters.
2. Position the cursor in the System Location field. Enter the physical location of
the unit.
The maximum length of System Location is 128 characters.
August 1998
Change Identity
IDENTITY
Hotwire
Model: 7976
Clear
Clear
Clear
Î Î
Î Î
MainMenu Exit
7976-A2-GB20-10