Configuration Edit/Display - Paradyne Hotwire 8775 Installation Instructions Manual

Configuration Edit/Display

Î
8775-A2-GZ40-10
The Configuration Edit/Display screen is displayed when the current, customer, or
default configuration is loaded and allows groups of configuration options to be
displayed. To access the Configuration Edit/Display screen, follow this menu
selection sequence:
Main Menu Configuration
– or –
Main Menu Configuration
main/config/edit
Slot: 4
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Ctrl-a to access these functions, ESC for previous menu
Save
Select . . . To Access the . . .
Network Network Interface Options, Table 1
SYNC Port Synchronous Data Port Options,
Table 2
Copy Ports Copy Ports Options, Table 3
System System Options, Table 4
Options
H
Management Telnet Session Options, Table 5
and
H
General SNMP Management
Communication
Options, Table 6
H
SNMP NMS Security Options,
Table 7
H
SNMP Traps Options, Table 8
March 1999
Current Configuration
Default Factory Configuration
CONFIGURATION EDIT/DISPLAY
Network
SYNC Port
Copy Ports
System Options
Management and Communication
Hotwire
Model: 8775
Î Î
MainMenu Exit
To Configure the . . .
SDSL network interface
Ports 1–4.
Synchronous DTE interface
Ports 1–4.
SDSL network and
synchronous DTE interface
ports by copying options
from port to port.
General system options of
the unit.
Management support of the
unit through SNMP and
Telnet.
15