Transmitting At A Designated Time - Konica Minolta bizhub 362 User Manual
Facsimile operations
Hide thumbs
Also See for bizhub 362:
- Service manual (846 pages) ,
- User manual (450 pages) ,
- Installation manual (36 pages)
Table of Contents
Advertisement
7
7.8
Transmitting at a Designated Time
A document scanned into the memory can be transmitted at a designated
time.
Transmitting at a Designated Time
0 When using time designated transmission, up to 200 transmissions can
be stored for transmission.
0 Time designated transmission cannot be set at the same time as real-
time transmission and priority-TX.
1
Press [Fax/Scan] on the control panel to open the fax screen.
2
Press [FAX Menu].
3
Press [Set 2], and then [Timer TX
Setting].
4
Specify the transmission time, and
then press [Enter].
–
To release the setting, press
[OFF]. You return to the fax
screen.
–
"Hour" and "minute" of the time
to start communication are
displayed in the 24-hour style,
and entered in two digits.
Press [Hour] or [Minute], and then use the keypad to type in the desired
time.
5
Designate the destination. Set the original document.
6
Press [Start].
The FK-503 reads the document and holds it in memory until the
specified time when transmission starts.
7-18
Transmission applications
bizhub 362/282/222
Advertisement
Table of Contents
