System (Administrator Mode); To Change Settings - Konica Minolta bizhub 362 User Manual

Specifying settings using PageScope Web Connection
12.5

System (Administrator mode)

From the [System] tab, various settings concerning the system configuration
of this machine can be changed. Settings for the following fax functions can
be specified.
"Output Tray Settings" of "User's Choice 5"
"Default LCD Screen" and "Priority Fax Screen" of "User's Choice 6"
"Restrict One-Touch Editing" and "Activity Report E-mail Address" of
"Administrator Settings"

To change settings

1
In the Administrator mode, click the [System] tab.
– For the procedure to log on to Administrator mode, refer to
"Logging on to administrator mode" on page 12-10.
2
Click [User's Choice 5].
3
Select the paper output tray for fax output.
4
Click [User's Choice 6].
5
Specify the initial screen and fax screen that are given priority.
6
Click [Apply].
7
Click [Administrator Management].
8
Click [Administrator Settings].
9
Select a setting for "Restrict One Touch Editing".
– To prevent one-touch dial buttons from being registered or
changed from the User Setting screen, select "On".
– To allow one-touch dial buttons to be registered or changed from
the User Setting screen, select "Off".
10
Specify a setting for "Activity Report E-Mail Address".
– Type in the e-mail address of the computer. The CSV file of the
activity report is sent to the specified e-mail address.
11
Click [Apply].
bizhub 362/282/222
12
12-25