Header Information - Konica Minolta bizhub 362 User Manual

Transmission applications
7.2

Header information

If transmission information is set to be added, information such as the
sender's name, recipient's name, transmission date, document number and
page number can be printed at the edge of the fax printed by the recipient.
With a broadcast transmission, the fax can be sent printed with the name of
each recipient.
8 sets of transmission source information can be programmed and used to
send faxes within the same company by using the department name or to
send faxes to a different company by using the company name.
In addition, in order to quickly verify who the document is being sent to, the
recipient's name can be included in the transmission information printed
from the recipient's machine. The printed name is the recipient name
registered with the one-touch dial button.
Header information
1
Press [Fax/Scan] on the control panel to open the fax screen.
2
Press [FAX Menu].
3
Press [TSI] on the Set 1screen.
4
Select the print type for the transmission information, and then touch
[TSI Selection].
5
Select the transmission source
name, touch [Enter] and then press
[Enter] in the next screen that
appears.
bizhub 362/282/222
7
7-7