Rx Document (Administrator Mode) - Konica Minolta bizhub 362 User Manual
Facsimile operations
Hide thumbs
Also See for bizhub 362:
- Service manual (846 pages) ,
- User manual (450 pages) ,
- Installation manual (36 pages)
Table of Contents
Advertisement
12
12.12 RX Document (Administrator mode)
The method for processing a received document can be specified.
The processing methods consist of the following three methods.
- F-Code: This machine can be set to perform a specific operation when a
document is received with an F-code.
- Processing of documents received per line (Port): The processing of a
received document such as printing and forwarding can be specified per
line when the document is received.
- Processing of other received documents (All Other Documents): Specify
the processing method of documents received by a line other than port.
With "F-Code", settings can be specified for the following.
Item
F-Code
F-Code Pass-
word
Retype F-Code
Password
Remote Input
Check
RX Doc. Set-
tings
Forwarding
Destination
In "Port", the following settings can be specified.
Item
Distribution
Conditions
RX Doc. Set-
tings
Forwarding
Destination
12-42
Specifying settings using PageScope Web Connection
Description
Specify the F-code with which document management is performed.
Specify the password for the F-code with which document management is
performed.
Retype the password for the F-code.
To limit viewing depending on the F-code password, select "On".
Select how the document received with the specified F-code is managed.
Print: Select this setting to print the document.
Forward: Select this setting to forward the data to the specified recipient.
Print&Forward: Select this setting to print the document and forward it to the
specified recipient.
Specify a destination when "RX Doc. Settings" is set to "Forward".
Description
Select whether to process the document of a selected line.
Specifies: Specifies the save destination and forwarding destination of the re-
ceived document.
Default: Does not process the received document.
When "Specifies" is specified in Distribution Conditions, select the processing
method for the received document.
Forward: Forwards the data to the specified destination.
Print: Prints the document.
Print&Forward: Prints the document and at the same time forwards the data
to the specified destination.
Specify when "Forward" is selected in RX Doc. Settings. Click [Select For-
warding Destination], select the forwarding destination address, and then
click [Apply].
bizhub 362/282/222
Advertisement
Table of Contents
