Utility mode
11.4
User User Management
Various functions, such as the screen mode and the volume of alarms, can
be specified, allowing the machine to be used more easily.
Reminder
If the [Utility/Counter] key was pressed to register items and specify
settings, be sure to press the [Reset] key in the control panel after
returning to the standby screen (initial screen).
To specify user management settings
1
Press [Utility/Counter].
The Utility/Counter screen appears.
2
Press [User Management].
The User Management screen
appears.
3
Select a parameter to be set.
4
Specify the desired settings, and then press [Enter].
–
To cancel changes to the settings, press [Cancel].
Note
To exit the User Management screen, press [Enter] in each screen until
the standby screen appears.
bizhub 362/282/222
11
11-17