Transmission applications
7.11
Performing Password Transmission
Transmission will only be possible if these passwords and those (group
passwords) that are registered for recipients match. Please use these
passwords in order that important documents are not erroneously
transmitted to the wrong recipient.
Performing Password Transmission
1
Press [Fax/Scan] on the control panel to open the fax screen.
2
Press [FAX Menu].
3
Press [FAX], and then [Password TX].
–
To cancel the function, press the
button again to deselect it.
[Password TX] is highlighted.
4
Designate the destination. Set the original document.
5
Press [Start].
Note
Confidential transmission requires that the destination receiving the
transmission has a restricted access box and password defined for that
station's fax machine. The password may not be needed, depending on
the fax machine.
!
Detail
These passwords need to be configured in advance in the utility mode.
For details, refer to "Password Registration for Password
Communication" on page 11-48.
For details on password reception, refer to "Password Registration for
Password Communication" on page 8-3.
bizhub 362/282/222
7
7-23