Specifying Restrictions For Registering Fax Addresses - Konica Minolta bizhub FK-503 User Manual

11
Specifying restrictions for registering fax addresses and printing re-
ports and specifying how one-touch dial recipients are displayed (mode
477)
Specify whether or not fax addresses can be registered and reports can be
printed by users. In addition, specify whether or not one-touch dial informa-
tion is displayed in screens and reports.
Settings at time of purchase
Bits
Setting
Specifying the setting
During the production of this unit, the settings in the shaded cells were se-
lected. The numbers on the right side indicate the page numbers with de-
scriptions for the corresponding function.
Bit
7
6
5
4, 3, 2, 1, 0
*1 If bit 6 is set to "1", the settings will not be applied if bit 5 is set to "1" (not
displayed). If you do not wish to display the fax number or address of the re-
cipient, bit 6 must also be set to "1" (settings can only be specified in Admin-
istrator mode).
*2 If the recipient is directly specified from the Direct Input tab, the recipient
is displayed, even if "1" (not displayed) is selected.
11-88
7 6 5 4 3 2 1 0
0 0 0 0 0 0 0 0 (HEX: 00)
Description Setting
----------------------- 0
Specifies whether 0
settings for register-
ing fax addresses or
1
printing reports can
be specified by only
the administrator or
also by the user
Specifies whether or 0
not only recipient
1
names are displayed
(and the fax number
or address is not
displayed) in reports
and Job List screens
and when a one-
touch dial button is
* *
touched 1, 2
----------------------- 00000
Description
*Do not change this bit.
Settings can also be
specified by users.
Settings can only be
specified in Administrator
mode.
Displayed
Not displayed
*Do not change these
bits.
bizhub 350/250
Page refer-
ence
----------
p. 11-45
----------
----------