Transmission Source Registration; To Register Transmission Sources - Konica Minolta bizhub 362 User Manual

12
12.8

Transmission source registration

Select the information, such as the name, fax number, or address, that is
printed at the edge of the page when a fax is sent.
Registers this transmission source name. Since multiple transmission
sources can be registered, the names for each destination and track can
used separately. The registered transmission source name can be changed
in the same procedure as that of registration.

To register transmission sources

1
In the Administrator mode, click the [Fax/Scan] tab.
– For the procedure to log on to Administrator mode, refer to
"Logging on to administrator mode" on page 12-10.
2
Click [TSI Registration].
3
Enter the transmission source name, and then click [Apply].
– Up to 8 transmission source names can be registered.
– Up to 40 characters can be entered.
4
Click [OK].
12-32
Specifying settings using PageScope Web Connection
bizhub 362/282/222