Utility mode
11.12 Specifying transmission settings (TX Settings)
Specify the default transmission settings.
Settings can be specified for the following.
Function
Quality/Mode
Default Quality
Default Density
Communication Mode
Comm. Menu
TX
TSI
Rotation TX
2-Sided TX
bizhub 362/282/222
Description
Sets the default quality value for each operation.
Sets the default contrast value for each operation.
Specify the default communication mode that is selected
when an operation is finished.
Select the transmission method.
Memory TX: Sends the data after the entire document is
scanned.
Quick Scan TX: Sends the document one page at a time.
Select where the transmission source name is added.
OFF: The transmission source name is not added.
Inside Body Text: The transmission source name is printed in
the document.
Outside Body Text: The transmission source name is printed
outside of the document
Sets whether to return to rotation transmission or not after
each operation.
Specify whether or not double-sided transmission is selected
when an operation is finished.
11
11-33