Fax Program Registration (User Mode) - Konica Minolta bizhub 362 User Manual

Specifying settings using PageScope Web Connection
12.4

FAX Program registration (User mode)

Register fax programs as one-touch registrations. Unlike the one-touch
registrations where only recipients are registered, transmission settings and
multiple recipients can be registered. The registered data can also be
changed or deleted.
Note
Up to 30 fax programs can be registered in this machine. Be sure to not
exceed a total of 540 one-touch registrations and fax programs.
To register a fax program, specify the following items.
Item
Program Name
Mode
Destination
Quality
Quality
Density
Reduction
Scan Area
Menu 1
TSI
Dest. Insert
TX Report
2in1
bizhub 362/282/222
Description
Enter the program name displayed with one-touch registration. Up
to 12 characters can be entered.
Specify "TX".
Specify the program destination. Click [Select Destination], select
the registered one-touch registration that is selected, and then
click [Apply].
Select the resolution.
Select the density.
Select the zoom ratio.
Auto Reduction: Automatically enlarges or reduces to match the
destination paper.
No Reduction: Sends at the reduction of the scanned original di-
mensions.
Specify the original document size when scanning.
Select the information, such as the name, fax number, or address,
that is printed at the edge of the page.
For registering the transmission source, refer to "Registering TSI
Names" on page 11-27.
Select whether or not the recipient's name is printed at the edge of
the page.
Select under which conditions the send report is to be output.
Default: Outputs by the specifications of the administrator.
Output On: Outputs regardless of the send results.
If TX Fail: Outputs only when undeliverable.
Output Off: Does not output regardless of the send results.
Select whether or not to send the data using the 2in1 print function
(reducing two pages to fit in a single page).
12
12-21