Tcp/Ip (Administrator Mode) - Konica Minolta bizhub 362 User Manual

Specifying settings using PageScope Web Connection

12.14 TCP/IP (Administrator mode)

Specifies the required settings for using this machine over a network.
In TCP/IP, the following settings can be specified.
Item
TCP/IP Config-
uration[*]
DHCP Configu-
ration [*]
IP Address [*]
Subnet Mask [*]
Gateway Ad-
dress [*]
RAW Port[*]
RAW Port
Number
Self-Domain
Name [*]
Port Number[*]
DNS
Configuration
Host Name
Domain Name
DNS Server
Address 1 to 3
DNS Query
Timeout
SLP Setting[*]
LPD Setting[*]
bizhub 362/282/222
Description
Select whether to enable or disable TCP/IP.
Specify the DHCP server to enable (acquires the IP address automatically) or
disable (specifies a fixed IP address).
Specify the IP address of this machine. Specify when "Disable" is selected in
DHCP Configuration.
Enter the subnet mask of the network to be connected. Specify when "Disa-
ble" is selected in DHCP Configuration.
Enter the default gateway of the network to be connected. Specify when "Dis-
able" is selected in DHCP Configuration.
Select whether or not a port number is used with RAW printing.
Specify the RAW port number. Enter the port number within the range of 1 to
65535.
Specify the domain name of this machine. Specify when performing direct fax
transmission over a mail server.
Type in a port number between 1 and 65535 for this machine's domain.
Specify "Yes" or "No" for the DNS (Domain Name System).
When using a DNS server within a network, specify "Yes". When not using the
a DNS server within a network, specify "No".
Specify the host name of this machine.
For the contents to be entered, ask the network administrator. Specify when
"Yes" is selected in DNS Configuration.
Specify the domain name of the DNS server.
For the contents to be entered, ask the network administrator. Specify when
"Yes" is selected in DNS Configuration.
Specify the IP addresses of the DNS server.
For the contents to be entered, ask the network administrator. Specify when
"Yes" is selected in DNS Configuration.
Select the time when the attempt to access the DNS server is stopped. Select
20, 40, 80, 160, 320, or 640 seconds.
Select whether to enable or disable SLP (Service Location Protocol).
Select whether to enable or disable LPD (Line Printer Daemon).
12
12-51