3
To perform a check receiver transmission
1
Press the [Fax/Scan] key to display the Fax mode screen.
2
Position the document to be faxed.
3
Touch [Direct Input].
4
Using the keypad, type in the fax number of the recipient, and then
touch [S].
–
To temporarily cancel the checked receiver transmission operation
when the software switch settings are specified to automatically
perform the operation (bit 4 of mode 200 is set to "1"), touch [S]
twice to enter "SS" after the telephone number.
5
Press the [Start] key.
The transmission begins.
3-34
Transmission
bizhub 362/282/222