Utility mode
11.11 Preventing changes to one-touch dial buttons
The machine can be set to limit the users allowed to register and change
one-touch dial buttons.
To prevent changes to one-touch dial buttons
1
After entering Administrator mode, press [Admin. 1].
2
Press [Admin. Set].
3
Press [Restrict One-Touch Editing].
–
This button does not appear if
"Enhance Security" was set to
"ON".
4
Press [ON], and then press [Enter].
5
Press [Enter] in each screen until the standby screen (initial screen)
appears.
bizhub 362/282/222
11
11-31