Specifying The Deleting Method For [Del.] In Input Screens (Mode 478) - Konica Minolta bizhub 362 User Manual

11

Specifying the deleting method for [Del.] in input screens (mode 478)

Specify the deleting method for [Del.] in input screens.
Select whether the character at the cursor's position or the character to the
left of the cursor is deleted.
Settings at time of purchase
Bit
Setting
Specifying the setting
During the production of this unit, the settings in the shaded cells were se-
lected. The numbers on the right side indicate the page numbers with de-
scriptions for the corresponding function.
Bit
7
6, 5, 4, 3, 2,
1, 0
11-102
7 6 5 4 3 2 1 0
0 0 0 0 0 0 0 0 (HEX: 00)
Description Setting
Specify the deleting 0
method for [Del.] in
input screens.
1
---------------------- 0000000
Description
Deletes the character at
the cursor's position
Deletes the character to
the left of the cursor
*Do not change these bits
when specifying settings
for this function.
bizhub 362/282/222
Utility mode
Page Refer-
ence
p. 14-3
----------